MR Series Cotton Seed Saw Delinter

144D_Saw_Delinter

Introduction of Cotton Seed Saw Delinter
Saw-tooth type cotton seed delinter is mainly used to separate short fiber from ginned cottonseeds in cottonseed processing plants and cottonseed oil mills. The machine has three models separately for stripping the first, the second and the third (the 1st, 2nd and 3rd ) cut lint. It can also be used as matching equipment with cotton ginning machine(the

cotton_linters_2nd_cut

match ratio depends on the actual requirements).
* MR-144G is the optimum design of MR-144 series delinter, smaller space, high yield rate, low linter remaining.
* MR-161B is the optimum design of MR-161, effectively reduce saw shaft motor power allocation, lower power consumption.
* For model MR-178 delinter, first cut, second cut and third cut are all brush type delinter.
Technical Features of Sawtooth Delinter
* Automatic control for whole machine, intelligent control for cottonseed feeding, stable and reliable performance.

Delinted_Cottonseed

* Adopting large working box, high production efficiency, low percentage of lint remaining on cottonseed, fine product quality, saving energy and lowering power consumption.
* Saw blades adopting imported American blanks, high output and long using life.
* First cut adopting brush brush linter, second and third cut adopting pneumatic or brush brushing linter, choosable directions of absorbing air.
* Scientific and reasonable machine structure, adopting many kinds of new technology and new material.
* Adopting fully closed and painted protection cover, safe and environmental friendly.
* Different number of main machines adopting different cuts proportion may build cottonseeds delinting production lines of different scales.

saw_delinter_principle

How Does Saw Delinter Work?
Double feeding rollers feed the cottonseeds continuously onto the cotton seed slide from cottonseed hopper. Cottonseeds slide down the slide into the working box. Iron debris in the seeds are absorbed onto the slide by the magnet behind it. By the stirring of seed stirring roller and frictional pulling force of the saw blade, cottonseeds in the working box form the seed roll, which rotates with seed stirring roller. When the seed roll moves into the space between seed stirring roller and saw blade, as the friction between saw blade and cottonseeds increases, and the linear velocity on the surface of saw blade is higher than that of seed roll, cotton linters are stripped from cottonseeds. Cottonseeds slide down the ribs and are discharged through cotton seed finger. Cotton linters are brought by sawteeth into the linter brushing part where they are brushed into linter course and sent to the battery condenser. Cotton trash are discharged from the trash removal adjustable board.
Technical Parameters of Saw Delinter

 
Model
MR-144D
MR-161
MR-161B
MR-144G
MR-178
Output
(seed
cotton)(kg/t.h)
First cut
3500-4500
4000-4500
4000-4500
3500-4500
4000-5500
Second cut
1000-1500
1200-1500
1200-1500
1000-1500
1300-1800
Third cut
750-1000
900-1100
900-1100
750-1000
950-1200
Saw Blade 
Diameter (mm)
Φ320
Φ320
Φ320
Φ320
Φ406
Equipped Power(kw)
24.35
31.35
27.85
27.85
31.35
Overall Dimensions
(L*W*H) (mm)
2600*1872*2000
2560*1320*2000
2560*1320*2000
2560*1320*2000
3000*1700*2168
Total Weight(kg) 
2500
3000
3000
3000
3500
Note
 
The above output refers to the output of standard grade seed cotton whose moisture 
is not more than 10%,  the rate of linter remaining and linter quality reaches standard.

 

Send Your Inquiry
  • Product Name :   MR Series Cotton Seed Saw Delinter
  • Name :  
  • E-mail :  
  • Content :  
LEAVE  A  MESSAGE